Ingoa me te Momo Hua： Kiriata ārai-pūmauRaupapa YM30
Ngā Āhuatanga Matua o te Hua
paninga kotahi, takirua rānei, he mahi ārai-pūmau pai, he uaua ki te whakaroa, he papatahi pai, he manawanui wera pai, he kounga mata pai.
Taupānga Matua
e whakamahia ana mō te kiriata tiaki ā-pūmau, te kiriata piri tiaki ā-pūmau (ā-pūmau, ātete puehu).
Hanganga
Pepa Raraunga
Ko te matotoru o te YM30A ko: 38μm, 50μm, 75μm, 100μm me te 125μm, me ētahi atu.
| RAWA | WĀHANGA | UARA NOA | TIKANGA WHAKAMĀTAUTAU | ||
| MATOTORU | µm | 38 | 50 | ASTM D374 | |
| KAHA TŪTURU | MD | MPa | 254 | 232 | ASTM D882 |
| TD | MPa | 294 | 240 | ||
| TE WHAKAROA | MD | % | 153 | 143 | |
| TD | % | 124 | 140 | ||
| TE WHAKAITI WERA | MD | % | 1.24 | 1.15 | ASTM D1204 （150℃×30min） |
| TD | % | 0.03 | -0.01 | ||
| TE TAURANGA O TE WAIRUA | μs | — | 0.32 | 0.28 | ASTM D1894 |
| μd | — | 0.39 | 0.29 | ||
| TE TUKU | % | 93.8 | 92.8 | ASTM D1003 | |
| KŌHUA | % | 1.97 | 2.40 | ||
| Ātete Mata | Ω | 105-10 | GB 13542.4 | ||
| TE PŪMAU PIRIPIRI | % | ≥97 | NGĀ TIKANGA WHAKAPĀ | ||
| TE WHAKATAETAETANGA MAKUKU | dyne/cm | 58/58 | 58/58 | ASTM D2578 | |
| ĀHUA | — | OK | TIKANGA EMTCO | ||
| WHAKAMĀRAMA | Ko ngā uara noa kei runga ake nei, ehara i te uara taurangi. Mena he whakaritenga motuhake a ngā kiritaki, kia rite ki te whakatutukitanga o te kirimana hangarau. | ||||
Ko te whakamātautau kume mākū e tika ana mō te kiriata kua maimoatia ki te korona anake.
Kei roto i ngā raupapa YM30 ko te YM30, YM30A, YM31, he rerekē ēnei i te AS primer.
Wā tuku: Hepetema-03-2024
